Vacatures     CLAROS
Nederlands

ORBISPHERE A1100 Elektrochemische zuurstofsensor, RVS, 40 bar

VEROUDERD ITEM

ORBISPHERE A1100 Elektrochemische zuurstofsensor, RVS, 40 bar
Productnr.: A1100-S00

VEROUDERD ITEM

Snelle detectie van procesveranderingen

A negligibly small residual signal and an unrivaled accuracy (±0.1 ppb) are made possible by the exclusive Orbisphere design. The very fast response time (down to t90 = 7.2 s) is achieved through a unique membrane installation, and is improved through the use of an auxiliary guard ring electrode to shield against the influence of other gases and improve stability. All these features provide a reliable and accurate sensor with fast reaction to sample changes for highly effective process monitoring.

De sensor kan in drie minuten worden gereviseerd met een prefilled recharge cartridge

With the pre-mounted membrane cartridge including electrolyte the sensor is ready to use in 3 minutes without the risk of incorrect membrane mounting.

Uniek ontwerp zorgt voor langere tussenpozen tussen twee laadbeurten

Unique design allows for extended period between recharges

ATEX-gecertificeerde sensor voor zware omgevingen leverbaar

ATEX certified A1100 sensor available for harsh chemical environments.

Rugged and Resistant

Robust stainless steel design for use in the most demanding applications including resistance to CIP and pressures up to 100 bar

Wat zit er in de doos

Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Specificaties

Beschermingsklasse: IP68
Certificering: 2004/108/EC - EN 61326-1
Flowsnelheid: Recommended flow rate in flow chamber
2935A-A: 25 mL/min
2952A-A: 50 mL/min
2956A-A: 180 mL/min
29552A-A: 50 mL/min
Garantie: 24 maanden
Gewicht : 0.3 kg
Materiaal in contact met monster: Stainless Steel 1.4404 (AISI 316L), surface finish: N5, Ra < 0.4 µm
Membrane (see specification table).
No O-rings are in contact with the sample.
Meetbereik: Range at 25 °C
2935A-A: 10 ppb - 400 ppm or 20 Pa - 1,000 kPa
2952A-A: 1 ppb - 80 ppm or 5 Pa - 200 kPa
2956A-A: 0.1 ppb - 20 ppm or 0.25 Pa - 50 kPa
29552A-A: 2 ppb - 80 ppm or 5 Pa - 200 kPa
Monster druk: 0 - 100
Nauwkeurigheid: ±1% of reading, or ± lower measurement range, whichever is greater ±1% of reading, or ± lower range, whichever is
greater (Assuming correct calibration)
Omgevingstemperatuur: -5 - 100 °C (23 - 212 °F) (due to electrolyte, but sensor will not be damaged up to 200°C / 392°F) (mechanical)
Responstijd: 2935A-A : 2,5 min
2952A-A : 38 s
2956A-A : 7,2 s
29552A-A : 90 s
Temperatuurbereik: -5 - 60 °C (23 - 140 °F), without grille, during measurement
-5 - 95 °C (23 - 203 °F), with grille
Wat zit er in de doos: Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.