Vacatures     CLAROS
Nederlands

SC 1000 Displaymodule met Modbus TCP, met GSM (EU)

SC 1000 Displaymodule met Modbus TCP, met GSM (EU)
Productnr.: LXV402.99.11001
Prijs per eenheid Neem contact op
Wordt binnen 1 week verzonden

More confidence in your instrument’s performance

Available exclusively on the SC1000, Prognosys predictive diagnostics uses patented multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 Controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Wat zit er in de doos

Display module with communication (as appropriate), basic user module

Specificaties

Afmetingen(H x B x D): 200 mm x 230 mm x 50 mm
Alarm: Laag alarmpunt, neutrale zone laag alarmpunt, hoog alarmpunt, neutrale zone hoog alarmpunt, vertraging uitgeschakeld en vertraging ingeschakeld
Analoge uitgang: met voeding via probemodule LXV400.99.xxxxx
Analoog output signaal: Functionele instelling: met voeding via probemodule LXV400.99.xxxxx
Beschermingsklasse: IP65
Bevestingsstijl: Oppervlak, paneel en buizen (horizontaal en verticaal) met optionele zonnekap
Certificering: Europese certificeringen:
CE per 73/23/EEC en 89/336/EEC
TUV-GS tot EN 61010-1
EN 61326 Amd's 1 en 2
Communicatie: Modbus (RS485): geavanceerde communicatie/netwerken met PLC- of SCADA-systeem direct vanuit de analyzer
Profibus DP/V1 (gecertificeerd)
GSM/GPRS Quad-band mobiele module (goedgekeurd door FCC en IC, alleen EU en VS)
Ethernetservicepoort, RJ45, 10 MB/s
Display: 320 x 240 Pixel, 256 colours glass/glass-touch supplied by display module
  ¼ inch VGA graphical backlit TFT color Glas/Glas-Touch screen, high resistance 320 x 240 pixels QVGA, 320 x 240 pixels, 256 kleuren, touchscreen
Display : 111,4 mm x 83,5 mm, QVGA, 320 x 240 pixels, 256 kleuren, touchscreen
Elektrische certificeringen: CE 2006/95/EG, EMC 2004/108/EG, TÜV/GS EN 61010-1, DIN EN 61326, FCC ID-nr. QIPMC56, CETECOM ICT M352023P
Garantie: 24 maanden
Gewicht : Ongeveer 1.2 kg (afhankelijk van configuratie)
GSM optie: Met GSM (niet-US)
Ingangen: Maximaal 12 analoge 0-20 mA, maximale impedantie 500 ohm per sensormodule. Aanvullende inputs beschikbaar met aanvullende sensormodules.
Materiaal: Polycarbonaat
Montageconfiguratie: wandmontagestatief
montagepaneel
montage
Omgevingstemperatuur: -20 up - 55 °C / 0 - 95% relative humidity, non-condensing
Opslag condities: -20 - 70 °C / 0 tot 95% relatieve luchtvochtigheid, niet-condenserend
Relais: Supplied by Probe Module LXV400.99.xxxxx
Sensors: met voeding via probemodule LXV400.99.xxxxx
Stroom vereisten (Hz): 50/60 Hz
Stroom vereisten (Voltage): 12 V DC
Uitgang: Maximaal 12 analoge 0/4-20 mA, maximale impedantie 500 ohm per sensormodule.
Aanvullende analoge outputs beschikbaar met aanvullende sernsormodules. Optionele digitale communicatie via Modbus (RS485) en Profibus DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Wat zit er in de doos: Display module with communication (as appropriate), basic user module