Vacatures     CLAROS
Nederlands

CLT10 sc Totaal chloorsensor met gecombineerde pH elektrode (op paneel)

CLT10 sc Totaal chloorsensor met gecombineerde pH elektrode (op paneel)
Productnr.: LXV45B.98.22022
Prijs per eenheid Neem contact op
Wordt binnen 2 weken verzonden

Chloordosering onder controle

The CLF10 sc and CLT10 sc Chlorine Analysers are designed to be used with all Hach digital SC controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors.

Minimale kosten

Chlorine measurement with the CLF10 sc and CLT10 sc amperometric technology eliminates the need for routine reagent replacement and waste stream management.

EPA Compliance

The CLF10 sc and CLT10 sc analysers can be used for reporting chlorine residual measurements in accordance with EPA Method 334.0. Additionally, Hach has created a suite of laboratory products and methods to help with startup and quality control procedures required for Method 334.0.

Real-time procescontrole

CLF10 sc and CLT10 sc advanced diagnostics alert you when the process has changed or the instument needs servicing. Diagnostic features include the Cal Watch algorithm for warning of pH and chlorine calibration deviation and a non-contacting sample flow sensor for notification of insufficient sample flow.

EPA compliant conform Methode 334.0

The CLF10 sc and CLT10 sc Chlorine Analysers allow for real-time monitoring and control of disinfection processes.

Wat zit er in de doos

CL10sc Panel, 1 m Digital Extension Cable, pH Combination Sensor, Panel Manual, Chlorine Sensor Manual, pH Combination Sensor Manual

Specificaties

Aansluiting: ¼" OD
  ½" ID
Afmetingen: Sensor Only: 195 mm x 25 mm (7.68 in x 0.98 in)
Bevestingsstijl: Panel or Wall Mounting
Breedte: 495.3 mm
Certificering: CE/ETL, EMC
Controller: Panel only
Controller compatibiliteit: SC200, SC1000, SC4500. All controllers sold separately
Detectiegrens: 30 ppb ppb (0.03 ppm) of lager
Druk bereik: 0,5 bar, geen drukstoten en/of trillingen
Garantie: 24 maanden
Gewicht : Approximately 5.5 kg
Panel and empty panel-mounted components only
interferenties: Vrij chloor: monochlooramine, chloordioxide, ozon en kalkresten. Totaal chloor: chloordioxide, ozon en kalkresten
Kabel aansluiting : 5 pin, M12 connector
Kabel lengte: 1 m (between gateway and SC controller)
Kalibratie methode: 1-punts of 2-punts (zero and slope) kalibratie
Lengte : Sensor: 195 mm
Materiaal: Paneel: Corrosie-resistent, volledig onderdompelbaar (RVSl, PVC, siliconenrubber en polycarbonaat)
Meetbereik: 0 - 20 ppm Cl₂
Meetmethode: Reagensvrij, electrochemisch, drie-elektroden amperometrisch systeem
Monster stroomsnelheid: 30 - 50 L/uur (7.9 - 13.2 gal/uur), Optimaal is 40 L/uur (10.5 gal/uur)
Monster temperatuur: 5 - 45 °C
Montage: Metric
Nauwkeurigheid: Totaal Chloor: ± 10 % van de referentietest** (DPD) bij een stabiele pH > 8.5 (±0.5 pH van de pH bij kalibratie)
  Totaal Chloor: ± 20 % groter dan 8,5
  Vrij Chloor: ± 3 % van de referentietest** (DPD) bij een constante pH > 7,2 (±0,2 pH unit)
  Vrij chloor: ± van de referentietest** (DPD) bij een stabiele pH > 8,5 (±0,5 pH van de pH bij kalibratie)
Omgevingstemperatuur: 0 - 45 °C
Omschrijving: CLT10sc Total Chlorine Sensor, pH combination sensor (On Panel)
Opslag condities: -20 °C - 60 °C droog
Opties: Combination pH Sensor
Parameter: Total Chlorine
pH bereik: 4 - 9 pH
pH Monitoring Required?: with pH Combination
Reproduceerbaarheid: 30 ppb or 3%, welke het grootste is
Responstijd: Total Chloor: 100 s seconden of minder bij een 90% verandering (T90) bij een stabiele temperatuur en pH
  Vrij Chloor: 140 s seconden of minder bij een 90% verandering (T90) bij een stabiele temperatuur en pH
Stroom vereisten (Voltage): None
Temperatuur compensatie: Interne temperatuur compensatie in de sensor
  Interne temperatuur compensatie in de sensor
Verzend gewicht: Ongeveer 20 lbs (9.1 kg)
Wat zit er in de doos: CL10sc Panel, 1 m Digital Extension Cable, pH Combination Sensor, Panel Manual, Chlorine Sensor Manual, pH Combination Sensor Manual