Vacatures     CLAROS
Nederlands

Contacting, Conductivity Analog Sensor, Cell Constant K= .05, ½" NPT PVDF Compression Fitting

Contacting, Conductivity Analog Sensor, Cell Constant K= .05, ½
Productnr.: 3422A1A50
Prijs per eenheid Neem contact op

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute
four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s Digital SC Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity, TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Compression fitting sensors—Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches (102 mm) insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches (178 mm).

Full-Featured “Plug and Play” Hach SC Digital Controllers

There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

Wat zit er in de doos

Includes: sensor with 15 m (50 ft) cable and manual

Specificaties

Cel constante (k-waarde): 0.05 cm⁻¹
Digital Gateway: None
Elektrode materiaal: Titanium
Garantie: 24 maanden
Installatie stijl: Compressie
Junction box: Geen
Kabel lengte: 15 m
Materiaal: Compression Fitting: 1/2" NPT PVDF
Meetbereik: 0 - 100 µS/cm
Sensor type: Analog
Wat zit er in de doos: Includes: sensor with 15 m (50 ft) cable and manual