Vacatures     CLAROS
Nederlands

Digital Contacting Conductivity Sensor, General Purpose, PPS Body, Cell Constant 10.0

Digital Contacting Conductivity Sensor, General Purpose, PPS Body, Cell Constant 10.0
Productnr.: D3433E8
Prijs per eenheid Neem contact op
Wordt binnen 2 weken verzonden

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hach’s easy DRY-CAL™ method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s Digital SC Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Non-metallic general purpose sensors have graphite electrodes and 3/4-inch male NPT threaded PPS bodies. These sensors can be mounted into a standard 3/4-inch pipe tee, 1.5-inch Hach union hardware, or fastened onto the end of a pipe.

Full Featured “Plug and Play” with Digital SC Controller

There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

Wat zit er in de doos

Includes: sensor with cable, digital gateway, extension cable and manual

Specificaties

Cel constante (k-waarde): 10 cm-1
Digital Gateway: External Digital Gateway
Druk bereik: 0 - 300 psi (20,7 BAR)
Elektrode materiaal: Graphite
Flow: 0 - 3 m/s (0–10 ft./s), maximum, fully immersed
Garantie: 24 maanden
Gevoeligheid: 0,5 %
Installatie stijl: Algemene doeleinden
Installatievereisten: PPS sensor body
Installation Kit: 3/4" NPT
Insteekdiepte: 33 mm Tee mount
Kabel lengte: 6 m
  7 m (23 ft.)
Meetbereik: 0 - 200000 µS/cm
Nauwkeurigheid: ± 2 % of reading above 200 µS/cm
Omgevingstemperatuur: -20 - 200 °C
Reproduceerbaarheid: 0.5 %
Sensor draad: 0,75"
Sensor type: Digital
Wat zit er in de doos: Includes: sensor with cable, digital gateway, extension cable and manual
zendbereik: 1000 m
Zendbereik: 100 m