Vacatures     CLAROS
Nederlands

SC1000-sensormodule, 4 sensors, 4x 4-20mA-uitgang, 100-240 VAC

SC1000-sensormodule, 4 sensors, 4x 4-20mA-uitgang, 100-240 VAC
Productnr.: LXV400.99.00121
Prijs per eenheid Neem contact op
Wordt binnen 1 week verzonden

More confidence in your instrument’s performance

Available exclusively on the SC1000, Prognosys predictive diagnostics uses patented multivariable diagnostic software to read multiple inputs from your instrument and alert you to the instrument's overall performance. An easy-to-read dashboard provides instant indication of measurement reliability and service requirements.

Plug and Play operation

There’s no complicated wiring or set up procedures with the SC1000 controller. Plug any Hach digital sensor into a Probe Module and it’s ready for use. No special ordering or software configuration is needed.

Communication options to fit any application need

The SC1000 controller features state-of-the art Modbus TCP/IP communications protocol for seamless integration into a network of devices that support TCP/IP sockets. Use a standard Ethernet cable or connect wirelessly using GSM/GPRS to communicate with your SCADA, PLC or other network. The SC1000 also offers up to 12 analogue outputs for measured values and up to 12 analog or digital values from non-digital sensors.

Expandable and upgradable

The SC1000 Controller can adapt to your needs. Add or change probes without having to change the controller. Plus, with a single Display Module, additional Probe Modules and associated sensors can be added or removed depending on operational needs. Fully upgradable software ensures that this system will not be obsolete. Hach service plans are available.

Wat zit er in de doos

SC1000 Probe Module with installed cards (as requested), Basic User Manual

Specificaties

Afmetingen(H x B x D): 250 mm x 315 mm x 150 mm
Alarm: Laag alarmpunt, neutrale zone laag alarmpunt, hoog alarmpunt, neutrale zone hoog alarmpunt, vertraging uitgeschakeld en vertraging ingeschakeld
Analog Output: One 4-20 mA Output Module
Analogue inputs: No Input Module
Analoog output signaal: Functionele instelling: PID, hoge/lage fasering, instelpunt, neutrale zone, overfeedtimer, vertraging uitgeschakeld, vertraging ingeschakeld
Beschermingsklasse: IP65
Bevestingsstijl: Oppervlak, paneel en buizen (horizontaal en verticaal) met optionele zonnekap
Certificering: Europese certificeringen:
CE per 73/23/EEC en 89/336/EEC
TUV-GS tot EN 61010-1
EN 61326 Amd's 1 en 2
Communicatie: Modbus (RS485): geavanceerde communicatie/netwerken met PLC- of SCADA-systeem direct vanuit de analyzer
Profibus DP/V1 (gecertificeerd)
GSM/GPRS Quad-band mobiele module (goedgekeurd door FCC en IC, alleen EU en VS)
Ethernetservicepoort, RJ45, 10 MB/s
Communicatie Mogelijkheden: None
Conduit for Relay Connection: Nee
Display: Backlit tft-glas/glas hoogresistent VGA-kleurentouchscreen van 14 cm met 320 x 240 pixels
Display : 11,4 x 8,6 cm
Garantie: 24 maanden
Gewicht : Ca. 6,5 kg (afhankelijk van configuratie)
Ingangen: Up to 12 analogue 0-20 mA, maximum impedance 500 Ohms per probe module. Additional inputs are available with additional probe modules.
Materiaal: ABS (displaymodule) en metalen (sensormodule) behuizing met roestbestendige afwerking
Omgevingstemperatuur: -20 - 55 °C / 0 - 95% relative humidity, non-condensing
Opslag condities: -20 - 70 °C / 0 tot 95% relatieve luchtvochtigheid, niet-condenserend
Prognosys: Nee
Relais: Maximaal door de gebruiker te configureren SPDT-contacten, geschikt voor maximaal 100 tot 230 VAC, 5 A resistief per sensormodule. Aanvullende relais zijn bij aanvullende sensormodules te verkrijgen.
RTC Module: Nee
Sensors: 4 sensoren
Stroom opties: 100-240V, geen voedingskabel, met buis
Uitgang: Maximaal 12 analoge 0/4-20 mA, maximale impedantie 500 ohm per sensormodule.
Aanvullende analoge outputs beschikbaar met aanvullende sernsormodules. Optionele digitale communicatie via Modbus (RS485) en Profibus DP/V1.
  Up to 12 analog 0/4-20 mA, maximum impedance 500 Ohms per probe module.

Additional analog outputs with additional probe modules. Optional digital communcations via Modbus® (RS485) and Profibus® DP/V1.
Wat zit er in de doos: SC1000 Probe Module with installed cards (as requested), Basic User Manual